Weatherables WKR-THDVA36-S6 Bedienerhandbuch PDF herunterladen

Before beginning any installation the installer must review all local building codes and

use suitable safety equipment and procedures.

If cutting material for installation double check all measurements before cutting.

The included screws are self-tapping but it is helpful to pre-drill holes.

Measure the distance between posts.

Subtract 1/2” from the total length of the rails to allow for the mounting brackets.

If cutting down the rails, subtract an equal amount from each end. This will keep the

pickets centered.

Measure and mark the rails, ensuring the cut is not in the middle of a picket hole.

Mark the bottom and top rail to the same length, ensuring the picket holes line up

before cutting the rail.before cutting the rail.

Cut the vinyl rail and the aluminum insert to the same length.

Step 1

Post Cap

Post Skirt

Top Rail

Bottom Rail

Foot Block

Bracket Cover

Mounting Bracket

Pickets

Plumb posts and install optional post skirt before installing railing sections.

Determine the distance between the deck and the bottom rail based on local code

(Generally 2”).

Mark your post where the black mounting bracket will be installed.

When marking your posts, subtract 1/4” to allow for the thickness of the

mounting bracket and mark the post with a pencil.

These instructions are designed to be supplemental; review all instructions

with the brackets before starting installation.

This step will be repeated on the opposite post.

Straight Railing Kit Instructions

THE MANUFACTURER WILL NOT BE HELD RESPONSIBLE FOR INCORRECT OR UNSAFE INSTALLATION.

It is the responsibility of the installer to conform to local building codes and safety requirements. It

is also the installer’s responsibility to obtain all necessary building permits. These instructions are

guidelines and do not cover every installation scenario. Separate instructions are included for

railing brackets and the railing foot block. If purchasing post mounts, specific instructions will be

included within the packaging. Review all instructions before starting railing installation. The

installer may need to modify the exact installation method to meet unique site requirements.

1 2

Inhaltsverzeichnis

Seite 1

Before beginning any installation the installer must review all local building codes and use suitable safety equipment and procedures.If cutting mater

Seite 2

Step 2Gently slide and snap the bracket covers over the rails.Step 3If needed, alter the post height and install the post caps.Notes: A non-ferrous m

Kommentare zu diesen Handbüchern

Keine Kommentare

Weatherables WKR-THDVA36-S6 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Nein Weatherables WKR-THDVA36-S6 herunter. Weatherables WKR-THDVA36-S6 Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Weatherables WKR-THDVA36-S6